Product Description:

Compared with thyristor , new generation IGBT transistor is able to not only control conduction ,but also control its turn-off action at will, however, the thyristor must be passively turned off and requires time to finish this action. Inverter power factor of IGBT transistor type is much higher (≥ 97%) and the furnace voltage much higher under the same input voltage (380 V). The IGBT inverter voltage is around 2800V, however, the traditional thyristor inverter voltage is only 750V and can reach a maximum value of 800V, therefore, the inverter voltage of IGBT is four times higher than that of the thyristor type, and wiring line loss is also low, about 15% energy saving is achieved.


Thick raw material for the shell of furnace, reasonable match between induction ring and capacitor, intelligent type digital main control board, constant output and high efficiency power factor are guarantee for quick melting speed.

This medium frequency supply can drive two or multiple furnaces and powered them at the same time, one is for insutaion and the other furnace can melting the material, of course, both furnace can also melting the raw material at the same time.

Features:

New generation IGBT can guarantee steady operation and reliable protection, greatly reducing maintenance costs. It can not be damaged in case of short circuit, ignition, steel penetration or water-cooled cable breakage due to burning.In addition, new generation IGBT has other advantages such as low operating noise, high over-load capacity, no special requirements for working environment and simple operation. Due to these features, IGBT can be regarded as an ideal power devices and widely used in induction welding furnace system.

Technical Parameters:

Induction melting furnace power supply, thyristor serial-connected inverter medium frequency power supply , one power supply cabinet drives two furnaces

Type	DX-1500Kw
inlet power supply ( V)	380V/ six phases
inlet current ( A)	1220A
Direct current voltage (V)	1000
Direct current (A)	1500
medium frequency voltage (+-10%) V	2400
medium frequency (Hz)	100-400Hz
medium frequency power (Kw)	1500KW

Applications:

Our First Class Medium Frequency Induction Melting System is widely used for melting metals such as iron, steel, copper and aluminum as well as other non-ferrous and ferrous metals. It is suitable for melting and it is an ideal choice for melting.

Support and Services:

For Induction Melting System, we understand that you expect the highest quality of service and technical support . Our team of specialists are here to provide you with prompt and reliable assistance for any technical issues you may encounter.
We provide a wide range of services, including:

• Troubleshooting and problem diagnosis
• Software and hardware updates
• Installation and maintenance of components
• Spare parts replacement
• General technical advice and support

We are dedicated to providing you with the best possible service and technical support for your system. If you have any questions or need assistance, please do not hesitate to contact us.

Packing and Shipping:

Packaging and Shipping for Induction Melting System:
Induction Melting System will be packaged in a wooden box with heavy-duty foam padding to ensure that it arrives in good condition during the shipping process. .
The system will be shipped via a reliable freight carrier and the delivery will be tracked to ensure that it arrives on time. All necessary paperwork, such as invoices and shipping documents, will be included in the package.